Aluminum profiles
-
NISA-PLA profile
The purpose of the profiles is:
Profile for lighting joyful architectural niches of varied height, depth and width.
Installation:
Fixed with the choice of screws depending on the mounting surface
Additional information:
Can be mounted vertically and horizontally
Can be mounted at any distance from the edge of the niche and walls
Light direction towards the ceiling
The light source is mounted in an easily demountable ONISA profile
€7.74su PVM Add to cart -
NISA-KON profile
The purpose of the profiles is:
The profile is designed for the illumination of architectural niches, located near and facing the walls.
Installation:
Fixed with the choice of screws depending on the mounting surface.
Additional information:
Can be mounted vertically and horizontally.
The light source is mounted in an easily demountable ONISA profile.
-
NISA-KRA profile
Profilepurposes:
Profile is designed for the bright illumination of architectural niches. Light is directed towards the ceiling. The effect depends on the distance to the ceiling.
Installation:
Fixed with the choice of screws depending on the mounting surface
Additional information:
Can be mounted vertically and horizontally
The light source is mounted into an easily demountable ONISA profile
€10.66su PVM Add to cart -
NISA-NI profile
The purpose of the profiles is:
The profile is designed for the bright illumination of architectural niches, which are near and facing the walls.
Installation:
Fixed with the choice of screws depending on the mounting surface
Additional information:
Can be mounted vertically and horizontally
The universal design allows you to direct the light at the ceiling or walls.
The light source is mounted in an easily demountable ONISA profile
-
45 Aluminium non-anodised
The purpose of the profiles is:
This corner profile is the pioneer of the 45° series of KLUS profiles. A sufficiently large amount of aluminium perfectly dispels the heat from the diodes, so we can confidently mount a large power LED into it.
Installation:
Mounted to the surface with the help of special brackets.
Additional information:
Aluminium can be anodised
Possibility of creating a ‘light line’.
-
POLI profile for niches
The purpose of the profiles is:
Profile is designed for a fun, minimalist lighting. Profile design and installation features make it possible to make a “flipped” lighting system.
Installation:
Mounted with fasteners, which point the profile in the required direction
Additional information:
Can be mounted vertically and horizontally
Can be mounted at any distance to the sides of a niche or walls
Light distribution in different directions
€3.94su PVM Add to cart -
MICRO Aluminium anodised
The purpose of the profiles is:
Minimalist profile, mainly used as a decorative lighting element. Due to its minimum outline, it perfectly “hides” even in the smallest cavity. The profile is characterized by a minimalistic design. Therefore, the possibilities of its use are very wide.
Installation:
Profile can be mounted with the help of brackets
Fixed with wood screws
Can be affixed to surfaces using the appropriate glue
Additional information:
Due to its small dimensions, perfect for the creation of cosy lumination.
€4.30su PVM Add to cart -
MICRO-K Aluminium anodised
The purpose of the profiles is:
The minimalist profile and design is mainly used as a decorative element for furniture lighting. It perfectly “hides” even on the thinnest panels. The profile is characterized by narrow “wings”, which give the product an aesthetic look and helps hide cavity trimming irregularities.
Installation:
The profile is affixed to the previously prepared cavity.
Additional information:
Due to its small dimensions, it is perfect for all types of furniture panels.
€5.00su PVM Add to cart -
PDS4 Aluminium anodised
The purpose of the profiles is:
This multi-purpose profile is one of the most widely used due to its minimalist but very successful design.
Installation:
Mounted with the help of various Klus fixing systems, it can be suspended on cables or metal bars.
Can be attached by wood screws.
Additional information:
Simple, solid construction
Safe,12 or 24V voltage allows the created product to be fed with a cable or bar (wire-less suspension system)
Possibility of creating a ‘light line’
-
PDS-H anodised profile
The purpose of the profiles is:
The enhanced version of the PDS4 profile, featuring a “clean” minimalist yet very successful design, is suitable for a wide array of uses.
Installation:
Mounted to the surface with the help of special brackets.
Can be attached by wood screws.
Additional information:
Simple design
Possibility of creating a ‘light line’
€4.84su PVM Add to cart -
SILER profile
The purpose of the profiles is:
The widened profile is ideal for installing sealed LED strip and can be installed in situ. The housing is anodized and cap UV resistant.
Installation:
Profile can be mounted with the help of brackets
Can be glued used special adhesives.
Additional information:
Convenient, fast installation/de-installation
Convenient service during use
€3.48su PVM Add to cart -
PDS4-K Aluminium anodised
The purpose of the profiles is:
The most widely used profile in the kitchen industry. Due to its small dimensions and construction, it fits perfectly onto any surface. Furthermore, it has an ideal “light line” effect, by hiding the dots from light emitting diodes. The profile has a wide range of “wings”, which make it aesthetically pleasing and helps to hide cavity trimming irregularities.
Installation:
The profile is affixed to the previously prepared cavity.
Additional information:
Due to its small dimensions, it is perfect for all types of furniture panels.
€5.00su PVM Add to cart