LED profiles and accessories
-
45 Aluminium anodised
The purpose of the profiles is:
This corner profile is the pioneer of the 45° series of KLUS profiles. A sufficiently large amount of aluminium perfectly dispels the heat from the diodes, so we can confidently mount a large power LED into it.
Installation:
Mounted to the surface with the help of special brackets.
Additional information:
Aluminium can be anodized
Possibility of creating a ‘light line’.
-
PDS4-K Aluminium anodised
The purpose of the profiles is:
The most widely used profile in the kitchen industry. Due to its small dimensions and construction, it fits perfectly onto any surface. Furthermore, it has an ideal “light line” effect, by hiding the dots from light emitting diodes. The profile has a wide range of “wings”, which make it aesthetically pleasing and helps to hide cavity trimming irregularities.
Installation:
The profile is affixed to the previously prepared cavity.
Additional information:
Due to its small dimensions, it is perfect for all types of furniture panels.
-
PDS-O Aluminium anodised
The purpose of the profiles is:
A very versatile profile is designed for round unit lights, along with suspended and mounted to the surface, standing lights and lighting systems. Simple, easy construction and durability.
Installation:
Mounted with the help of various Klus fixing systems, it can be suspended on cables or metal bars.
Additional information:
Simple, solid construction
Safe,12 or 24V voltage allows the created product to be fed with a cable or bar (wire-less suspension system)
-
HR Aluminium non-anodised
The purpose of the profiles is:
Profile for the production of IP67 protection class, floor recessed lighting fixtures, perfect for bathroom lighting systems.
Installation:
Glues to ready-made spaces between paving or wall tiles, finished with putty for filling tiles gaps.
Additional information:
Profile construction allows you to create various lighting systems (wall-floor).
Profile height is 8mm
Withstands that corresponding to domestic static loads.
€4.00su PVM Add to cart -
HR Line Aluminium anodised
The purpose of the profiles is:
Profile is designed for the production of IP67 protection class, floor-mounted recessed lighting fixtures. Perfect for outdoor use. The profile is suitable for parking areas, access paths, track lighting, is static load-resistant, and meets all requirements for pedestrian and car movement areas.
Installation:
Mounted into ready-made spaces in the pavement, on the cushioning profile of the extruded Frinfoam, the gaps are filled with sand.
Additional information:
The profile construction allows you to create lighting systems resistant to large static loads (cars).
€18.40su PVM Add to cart -
GIZA architectural profile
The purpose of the profiles is:
You immediately see that this surface mounting profile is perfectly concealed when using the TEKNIK profile. It allows you to create highly tasteful lighting solutions when the light drops from the tunnel formed by the TEKNIK mounting profile.
Installation:
The profile is mounted into TESE’s click mounting profile using brackets.
Additional information:
Profile construction allows you to create various lighting systems.
Using the TESE profile, the lighting system is easily accessible during service.
€6.39su PVM Add to cart -
LARKO architectural profile
The purpose of the profiles is:
The profile is designed to be mounted G/K panels ceilings. Possibility to create a uniform “Light line”. Simple construction and easy installation
Installation:
Mount to G/K ceiling cavity by means of springs or glue.
Additional information:
The profile design allows you to hide cavity cutting irregularities.
-
LIPOD architectural profile
The purpose of the profiles is:
Multi-use profile with the possibility to produce a smooth “light line”. Simple design, easy installation. Possibility to attach to the surface, suspend or connect to various systems. Also using the TEKNIK profile we can mount the profile onto a suspended ceiling structure.
Installation:
Fixes directly to the surface, using springs or screws.
Using the Klus support systems, the profile can be hung on cables or bars.
Using the TEKNIK mounting profile, there is the option of hiding the LIPOD profile in the ceiling.
Additional information:
Profile construction allows you to create various lighting systems.
By using the ZM connector, the profile can be connected at different angles and lengths.
€11.00su PVM Add to cart -
REGULOR ZWK anodised
The purpose of the profiles is:
This profile is designed for directional, concentrated light flow creation. The inner profile insert allows you to produce four lighting angles – 10, 30, 60 and 90°. Supplied with a focusing cover. Creates a beautiful “sliding” light effect.
Installation:
Mounted to the surface with the help of special brackets.
Can be attached by wood screws.
Additional information:
Simple design
The ability to produce four angles of light flow
€15.00su PVM Add to cart -
Kozel anodised
The purpose of the profiles is:
The profile is designed for mounting on ceilings and walls. The unique design allows you to obtain an ideal, clean, narrow “light line” effect, without any visible aluminum parts.
Installation:
Mounted in holes prepared in the wall or ceiling, with the help of installation adhesive.
The profile “wings” are covered with a layer of putty using a reinforcing mesh.
Additional information:
Can be used with TECH22 type mounting frame, which protects the profile inside from paint and putty during preparation.
-
KOZMA užglaistomas led profilis viengubam gipso sluoksniui 18040NA
Price Price €10.41 – €31.22 su PVM Select optionsPrekės kodas: 18040NA
Profilių paskirtis:
Profilis skirtas montuoti į lubas ar sienas.Unikali konstrukcija leidžia išgauti idealios,švarios siauros „šviesos linijos“ efektą,be jokių matomų aliuminio detalių.
Montavimas:
Montuojamas į paruoštas sienų ar lūbų angas,montažinių klijų pagalba.
Profilio „sparneliai“ dengiami glaisto sluoksniu naudojant armavimo tinklelį.
Papildoma informacija:
Gali būti nauduojamas su TECH22 tipo montažiniu rėmeliu,paruošimo metu saugančiu profilio vidu nuo dažų bei glaisto.
-
PDS-H anodised profile
The purpose of the profiles is:
The enhanced version of the PDS4 profile, featuring a “clean” minimalist yet very successful design, is suitable for a wide array of uses.
Installation:
Mounted to the surface with the help of special brackets.
Can be attached by wood screws.
Additional information:
Simple design
Possibility of creating a ‘light line’
€4.84su PVM Add to cart