“SZER” extrusions are designed to build LED fixtures of significant light output. The width of these extrusions allows a maximum of 4 LED strips of 10,8mm each. The extrusion is available with a dedicated frosted SZER cover which has very good light diffusing properties and light transmittance of 89%. Due to the cover and properly designed height of the extrusion you can obtain a line of light. A characteristic feature of SZER extrusions is their big, aesthetically designed radiators which have effective heat dissipation properties. SEKODU – wide flange extrusion to be mounted in grooves of various surfaces such as drywall. Mounting is achieved with the use of KMA mounting springs. After the fixture is fitted, you obtain the effect of a flat and wide line of light. SEKODU extrusion has small grooves that allow the use of ZM connectors with which you can connect the profiles into long runs, at right angles or at 135o. End caps are available in light gray or metallized finish – light-tight finish which resembles the color and surface of aluminum. End caps are sold in sets with matching screws.