The KOPRO extrusion is designed to build universal interior lighting fixtures. This profile directs the light beam at an angle of 45° so you can achieve the effect of mild accent illumination and avoid glare. It is to be mounted in corners (e.g. bodies of furniture, cabinets, where ceiling meets wall, shop windows).
The profile can also serve as a wall lamp fixture. The KOPRO extrusion can be mounted with screws or bolts (suitable for a particular substrate) screwed into the walls of the profile which are not intended for LEDs. Holes for the bolts or screws should be drilled in places designated by the lines inside the extrusion. In drywall ceilings, the profile can be fixed using GP mounting springs.
The KOPRO extrusion can also be mounted using mounting adhesives. After the profile has been mounted, a shallow ‘tray’ is formed which can be used to route the power cables.The profile can be additionally equipped with two 10mm wide LED strips or one LED strip with a width of no more than 20 mm. There are three types of covers and end caps which are dedicated for the KOPRO extrusion:- KOPRO-P (flat) cover, KOPRO-P end cap- KOPRO-L (semicircular) cover, KOPRO-L end cap- KOPRO-K (angular) cover, KOPRO-K end cap